URSUS is a bending machine for roofers who require maximum strength and reliability from the machine – for those who primarily care about unrivalled precision.
The only bending machine with undercuts on the edges of the upper beam, enabling “can” bending. The machine is also equipped with stronger cylinders for the bending beam than the LYNX bending machine.
|working field||2300 mm|
|bending element||15 mm|
MAXIMUM BENDING THICKNESSES
EFFICIENT SELF-LUBRICATING SYSTEM ENSURES HIGH MACHINE LIFE, LOW COEFFICIENT OF FRICTION AND MAXIMUM DAMPING OF VIBRATIONS.
…upper beam. Thanks to it, the one-man operation of the machine is possible – and in any place.
They stabilise the sheets during measuring, thereby enabling independent work. They are very durable (neodymium). They are placed below the guide surface of the sheet – they do not touch it.
It allows you to monitor the bending angle of the sheet. It is precise and placed in a clearly visible place. It shows great resistance to the external conditions and abrasion.
It helps to create a comfortable workplace – the height of the machine can be adjusted to the operator’s needs (adjustable up to 12 cm).
Large (up to 10 sheets of metal), stable, easy to assemble and disassemble. Equipped with wooden slats ensuring the safety of the material as well as bumpers with grids allowing for serial cutting and bending.
This gives the possibility of adjusting the clamping force to the thickness of the compressed sheet.
Equipped with a lower disc cover, thanks to which the disc does not chip and the sheet does not bend or get dirty. Durable metal bearings with a double-sided lock prevent the knife from
falling out. Its handles are secured with a rubber tip.
It prevents excessive wear of the bearings and cutting wheels (the cutting knife does not come into contact with the sand). It facilitates the work of the operator who can have a knife always at hand.
Their design ensures that the cutting width of the sheet is kept constant and allows for the flexibility of its movements (there is no risk of corrugation).
It prevents cut sheet strips from falling onto the platform and protects the operator’s legs.
…for transport belts. Provide the machine with safe and stable transport by vehicle. Designed from the ground up to protect its calibration and precision.
They enable safe and trouble-free handling of the machine in the workplace. They can be dismantled.
It reduces the weight of the bending beam, which facilitates the operation of the machine and minimises the need to use hand force.
Large (220 mm/60 mm), noninflatable and yielding, thus durable. They enable fast and safe movement of the bending machine, even indifficult terrain. You can bend them.
It is a guarantee of stability and precision. Thanks to it, you can set four selected, repeatable bending angles.
They eliminate the differences in dimensions between the knife and the machine, showing the real, exact size of the cut.
ul. Przemysłowa 8
11600 Węgorzewo / Poland
T/F +48 (87) 428 1014
M +48 695 654 049